Status TTR200X
Status TTR200 TTR200X INPUT: MULTI TYPE RTD, SLIDE WIRE, RESISTANCE INPUTS ATEX AND IECEx APPROVED VERSION 22 SEGMENT USER LINEARISATION FOR INPUT SENSOR OFFSET AND OUTPUT ALIGNMENT ADJUSTABLE INPUT FILTER
PROGRAMMABLE BURNOUT The TTR200 'smart" transmitter is designed for use with RTD or Slidewire sensors. The flexible design allows the use of any resistive
sensor within the range of (10 to 10500) *. Pt100, 500, 1000, Ni or Cu sensors as well as slide wire sensors up to 100 K* can be
accommodated. Other sensor characteristics or your own 22 point linearisation characteristic (for slidewire or linear resistance) can
be downloaded into the product enabling you to adapt it exactly to your application. The TTR220X is approved to ATEX and IECEx
standards allowing for use in hazardous area applications.
PC configuration allows the user to select Sensor type, Range, Filter, Tag, Units and error signal without requiring calibration
equipment. Additionally, the user may read live process data when connected to the PC, this allows for sensor offset, and output
alignment calibration, where the user can enter values to match the actual process and therefore reducing system errors.
If required, the desired range can be specified at the time of order, removing the need for user configuration. If the range is not
specified then the transmitter will be shipped with the default range of Pt100 (0 to 100) °C, burnout high and filter off.
[ click here to view file attachment]
|
