Status SEM1600F For Frequency Or Pulse
Status SEM1600F
The Status SEM1600F is a cost effective "smart" powered conditioner that accepts all common process pulse signals with a frequency range between (0.01 to 65000) Hz in standard configuration and (DC to 1000) Hz in counter mode. Typical applications would be to measure flow or batch counting.
The product has a built in capability to operate as a dual input which allows differential flow / count measurement with advanced maths functions. Or, as a single channel input, with an external reset contact.
When operated in signal channel mode, the discrete input can be programmed to reset the total counter, batch counter or latched relay. The input can also be programmed to control the total counter direction with a combination of count up /count down or halt modes available.
A volt free output contact is provided capable of operating as either a relay, latched relay or pulsed relay. High and low level relay functions are also available. The output stage offers either voltage, bipolar voltage or active / passive current re-transmission signals. The retransmission signal can
be ranged to a scale anywhere within the process range.
The product uses a USB port for configuration, together with a simple to use free menu driven software configuration tool, allowing the user to take advantage of the products" comprehensive specification. The device can be configured to operate in three modes:-
Frequency to process signal mode plus relay
Advanced frequency mode with K factor, M factor, totalise, rate, maths functions, process signal + relay
Counter mode with K factor, totalise, maths functions, process signal + relay
Free Status Software Download is available Here Status Software Download
[ click here to view file attachment]
|
|
